Jasmic | Swingfog® SN 81 Thermal Fogger - Sprayers and Foggers for Mosquito Control, Insect Control, Pest Control, Odor Control

Click here for the thermal fogger brochure (pdf)

Note: PDF files require Adobe® Acrobat Reader software. If you currently do not have this software on your computer, click the icon below to download your free copy.
ULV Aerosol Foggers
  Electric Driven
  Gas Driven
Thermal Foggers
  Gas Pulse Engine
SN 50
SN 81
SN 101
Fogmaster® Foggers
Micro-Jet ULV 7401
Tri-Jet 6208
Pow-R-Jet 6309
Noz-L-Jet 7807
Fogmaster jr 5330
Swingfog® SN 81 Thermal Fogger
The Application
Working Principles
The Technique
The Advantage
Tech Specs
What's in the Box?
Optional Accessories
Specialty Options

The Application
The Swingfog® SN 81, our midrange high performance thermal aerosol fog generator for the efficient combating of mosquitoes, insects, pests, fungus diseases, viruses, bacteria, and deodorization. It is primarily used for stationary applications or attached to an ATV or truck bed.
  • Effective mosquito control in woods, swamps, creeks, streams, etc.
  • Plant protection in greenhouses and plantations (ornamental plants, vegetables, cocoa, sugar cane, coffee, palm trees, cotton and cereals).
  • Stock protection in silos, store rooms and protection plants for food and agricultural products, textiles and tobacco.
  • Disinfecting measures in the human area, in animal keeping and in food production plants.
  • Health and hygiene in public, private and commercial areas and in animal keeping (vector and communicable disease control, and pest control).
  • Deodorization measures in the human area, and in animal keeping.
Return to top ^

Working Principles
Swingfog® thermal aerosol fog generators are gasoline (unleaded or leaded) driven and work according to the SWINGFIRE® principle developed by Motan nearly 60 years ago. A fuel/air mixture from the carburetor is ignited in the combustion chamber, and the resulting deflagrations oscillate a column of gas in the resonator pipe between 80 and 110 times per second. The solution is injected into the hot air stream at the end of the fogging tube and is dispersed into the finest aerosol droplets and distributed into an extensive, dense fog. Chemical solution and fuel are conveyed by a small overpressure in their respective tanks. With the exception of the pulsing diaphragm, the system has no mechanical moving parts, and therefore no wear and tear. The pulsing diaphragm is used to supply the overpressure to the tanks. Electric energy is merely consumed at the start of the pulse engine for the initial spark, and is supplied by four standard D cell batteries.

Return to top ^

The Technique
The Swingfog® SN 81 is our midrange thermal aerosol fog generator. The power of the combustion chamber is more than 50 HP which makes it possible to apply oil based, water based, and wettable powder based chemicals in an equivalent droplet spectrum. The thermo-pneumatically produced fog guarantees a very high efficiency and excellent penetration.

Return to top ^

The Advantage
With a minimum quantity of chemical preparation, an optimal effect and coverage is achieved. In comparison with conventional methods, Swingfog® thermal aerosol fogging equipment achieves approximately 90% labor savings when treating small and large areas. There is no soil contamination by dripping losses and any chemical residues are reduced more rapidly. The Swingfog® technique provides a valuable contribution to the protection of the environment. By means of various nozzles either the ULV (Ultra Low Volume) or the LV (Low Volume) application can be employed.

Return to top ^

Tech Specs
The SN 81 Series
  SN 81 SN 81 PE SN 81 Pump
Power, Combustion Chamber: ---- 37.4 kW / 50.8 hp 32,200 kcal/h ----
Fuel Consumption: ---- 1 gallon or 4 liters per hour ----
Fuel Tank Capacity: ---- 1.2 gallons or 4.5 liters ----
Solution Tank Capacity: 2.4 gallons or
9 liters
2.6 gallons or
10 liters
Not Applicable (Solution conveyed out of a separate container)
Solution Tank Material: Stainless Steel Polyethylene Not Applicable (Solution conveyed out of a separate container)
Overpressure in Fuel Tank: ---- 0.12 bar ----
Feed Pressure in the Solution Tank: ---- 0.3 - 0.4 bar (Not Applicable to SN 81 Pump) ----
Ignition: Through 4 dry batteries in series (negative or ground)
Electronic ignition coil
Weight (empty): 32 lbs
or 14.7 kg
32 lbs
or 14.5 kg
51 lbs
or 23.0 kg
Dimensions (LxWxH): 68x15x13 in or 173x39x33 cm
Permitted Solution Types: Water Based, Oil Based, Wettable Powders
Fogging Data: Output (measured with water)
     Distance: 164 feet or 50 meters forward indoors
The above will vary outdoors depending on humidity and wind speed. Humidity will keep the fog closer to the ground, and wind speed will carry the fog a greater distance.
     Fog Particle Size: 0.5 - 50 microns
90% of the microns range from 15 - 25 microns depending on the solution type and nozzle used. The smaller the nozzle, the smaller the droplet size. When comparing droplet sizes using oil based and water based solutions (using the same nozzle), oil based solutions are generally slightly smaller in size.
     Solution Nozzle 1.0: 6 gallons or 23 liters per hour
     Solution Nozzle 1.1: 6.9 gallons or 26 liters per hour
     Solution Nozzle 1.2: 8.2 gallons or 31 liters per hour
     Solution Nozzle 1.4: 10.3 gallons or 39 liters per hour
     Solution Nozzle 1.7: 13.7 gallons or 52 liters per hour
     Solution Nozzle 1.9: 16.4 gallons or 62 liters per hour

Return to top ^

What's in the Box?
  • Standard Fogging Tube
  • Solution Funnel with Strainer (0.1 mm mesh width)
  • Fuel Funnel with Strainer (0.1 mm mesh width)
  • Tool Kit
  • Cleaning Equipment
  • Set of Spare Parts containing all important Gaskets, O-rings, Diaphragms
  • Carrying Strap
  • Instruction Manual with Operation, Maintenance and Repair Instructions (also includes complete spare parts list)
  • Nozzle Set:
    • Nozzle 1.2
    • Nozzle 1.4 (installed)
    • Nozzle 1.7

    In addition to the above named items, the SN 81 Pump model comes standard with the following:

    • Automatic cut-off device for the spraying mixture
    • Rechargeable battery with battery charger (12 V)
Return to top ^

Optional Accessories
  • High Performance Fogging Tube (suggested for water based chemical applications)
  • Silencer (used to bring down sound of machine)
  • Additional Nozzles:
    • Nozzle 1.0
    • Nozzle 1.1
    • Nozzle 1.9
Return to top ^

Specialty Options
  • Automatic cut-off device for the spraying mixture. This is recommended for inexperienced users using oil based solutions in enclosed areas or near flammable materials.

    The SN 81 Pump model comes standard with the above named specialty option.
Return to top ^